,

VALMET / Neles ND9103HX8 HART Intelligent Valve Controller

The Valmet Neles ND9103HX8 is a 4–20 mA HART valve controller with a medium-capacity 03 spool and G 1/4 pneumatic ports. X8 identifies the China CCC option. For replacements, match the full ordering code, actuator details and approval documents.

التصنيفات: , العلامة التجارية:
العلامة التجارية
فالمت
نموذج
ND9103HX8
Condition
Confirm with sales
Lead Time
Confirm with sales
  • Product Condition
  • الشحن العالمي
  • الدعم الفني
  • Warranty Support
المنتج الأصلي
100% منتج جديد ومستورد من المصدر الأصلي
تسليم سريع
الشحن العالمي
الدعم الفني
خدمة احترافية
ضمان لمدة عام واحد
جودة مضمونة

The Valmet Neles ND9103HX8 is an ND9000 intelligent valve controller for pneumatic control valves. It takes a 4–20 mA signal with HART communication and uses the medium-capacity 03 spool. If you are replacing an existing unit, match the complete ordering code and check the nameplate against the approval documents for your installation.

Product Contents

Neles ND9103HX8: HART Controller with the X8 Approval Option
المواصفات الفنية
CCC Documentation: What to Check Before Ordering
Matching the Medium-Capacity Spool to the Actuator
HART Configuration and Commissioning
ND9103HX8 Compared with HX and HX8T
Requesting a Supply Proposal
Frequently Asked Questions
Official References and Quotation

Neles ND9103HX8: HART Controller with the X8 Approval Option

The Neles ND9103HX8 is an ND9000 series intelligent valve controller with a 4–20 mA HART input and a medium-capacity pneumatic spool. Valmet’s ordering information identifies X8 as the Chinese CCC certification option. The supplied unit’s nameplate and applicable certificate must be checked against the intended installation.

This configuration is relevant when a purchase specification calls for the X8 option rather than a generic ND9103 controller. Keep the complete model on the enquiry and purchase order: communication electronics, approval designation and optional feedback hardware cannot be established from the housing alone.

المواصفات الفنية

المعلمات Specification / Selection Note
نموذج ND9103HX8
Brand / family Neles / Valmet ND9000
المدخلات والتواصل 4–20 mA مع نظام HART
Power arrangement بطارية قابلة للشحن
تكوين السلك 03: medium capacity; actuator stroke volume 1–3 dm³ under manufacturer selection guidance
عملية المحرك Single or double acting with appropriate configuration
Valve movement Rotary or linear with suitable mounting components
حماية الغرفة IP66 / NEMA 4X
Pneumatic ports G 1/4 (S, C1 and C2)
ضغط الهواء المستورد 1.4–8 bar (20–115 psi), within the actuator’s rated limits
Approval designation X8: Chinese CCC certification option
Ambient / electrical limits Use the actual certificate, protection concept, temperature class and installation instructions

CCC Documentation: What to Check Before Ordering

Begin with the approval requirements for the actual mounting location. Ask for a readable photograph of the offered unit’s identification and approval plates, together with the applicable certification documents. Compare the complete device code, protection marking and permitted conditions with the project specification.

Valmet lists X8 as the China CCC option. For the offered unit, match the Ex marking, temperature class and approved ambient range on the nameplate to the applicable certificate before specifying it for a hazardous location.

Do not treat X8 as another spelling of X. The X8 option is identified separately as Chinese CCC certification; the X option is listed for ATEX and IECEx. Likewise, an ingress-protection rating does not independently establish suitability for an explosive atmosphere.

The ND9100 standard enclosure should not be described as an Ex d flameproof housing merely because an approval option is present. Review the actual protection concept, electrical limits and installation instructions with the responsible instrumentation personnel before approving the configuration.

Matching the Medium-Capacity Spool to the Actuator

The 03 spool is the medium-capacity choice in Valmet’s selection table, associated with an actuator stroke volume of 1–3 dm³. This is a selection reference, not a guaranteed movement time. Required response and the complete pneumatic arrangement still need to be reviewed.

Record the actuator manufacturer, model, action type and stroke volume. Identify whether the valve movement is rotary or linear, and check the mounting bracket, shaft adapter and feedback arrangement. A matching bolt pattern is not enough to confirm the complete mechanical installation.

Define the tubing, fittings and cable entry components needed for the job. When reusing existing accessories, establish that they suit the replacement and remain serviceable. Request the delivery scope in writing so a controller-only price is not mistaken for a complete installation package.

HART Configuration and Commissioning

The H version combines a 4–20 mA control input with HART communication. Confirm the actual device revision and compatible engineering files before preparing host integration or handheld configuration tools. A fieldbus version from the same family is not a direct substitute for the HART input.

The ND9000 family supports local and remote configuration, calibration and diagnostic functions. Use those functions with the instructions for the installed revision. Mechanical feedback alignment and actuator settings should be established before calibration.

Plan commissioning under the site’s approved isolation and work procedures. Calibration may cause valve movement, so the process and personnel implications must be reviewed. This page is a selection and purchasing reference, not a procedure for testing an operating control valve.

ND9103HX8 Compared with HX and HX8T

The ND9103HX and HX8 share the HART and medium-capacity designations, but the approval option differs. Review the required jurisdiction, protection concept and actual documents before accepting one in place of the other.

ND9103HX8T includes the additional T position-transmitter option. The base ND9103HX8 code does not specify that hardware. If a separate analog position-feedback circuit is needed, state the requirement explicitly and request the correct complete ordering code.

The ND9103HN has no hazardous-area approvals under its N suffix. For other communication and approval arrangements, use the ND9103 series overview as a starting point, then verify the precise offered configuration.

Requesting a Supply Proposal

Send Wuhan Yuli the full required model, quantity, delivery destination and target date. Include an existing nameplate photograph and actuator details for a replacement, or the project specification for a new assembly.

Ask for actual-unit photographs, the available approval documents, product condition and included accessories. Confirm delivery timing and warranty terms in the written quotation. This page does not assert a live stock quantity, manufacturing date or fixed lead time.

Resolve any changed suffix or substitute configuration before issuing the purchase order. Our valve positioner replacement checklist helps organize the compatibility information needed for that decision.

Frequently Asked Questions

What does X8 identify?
Valmet lists X8 as the Chinese CCC certification option. The actual supplied-unit markings and certificate determine the permitted installation conditions.

Is this model FOUNDATION Fieldbus or PROFIBUS PA?
No. H identifies the 4–20 mA HART communication version. F and P are separate communication options.

Does ND9103HX8 include a position transmitter?
The listed code does not include T. Confirm the complete transmitter-equipped configuration if independent analog feedback is required.

Can the same approval limits be used for every ND9103 model?
No. Apply the certificate and instructions for the actual communication, approval and accessory configuration.

Official References and Quotation

Model information is based on Valmet’s ND9000 technical datasheet and installation and maintenance instructions. Consult the documents applicable to the supplied revision for detailed limits.

Request a Neles ND9103HX8 quotation with your actuator information and certification requirements. Confirm the exact configuration, condition, documentation and delivery scope before placing an order.

الرجوع إلى الأعلى