Neles ND9103HX combines HART valve positioning with the medium-capacity 03 spool and the X approval option. Review the exact certification and actuator requirements before selecting this configuration.
Product Contents
Neles ND9103HX: HART Control with the X Approval Option
Technical Specifications
What to Verify for a Hazardous-Area Installation
Medium-Capacity Spool and Actuator Matching
HART Integration and Commissioning
How HX Differs from HN and HXT
Ordering Information
Frequently Asked Questions
Official Documents and Request for Quotation
Neles ND9103HX: HART Control with the X Approval Option
The Neles ND9103HX is a Valmet ND9000 series intelligent valve controller with a 4–20 mA HART input and a medium-capacity pneumatic spool. Its X designation identifies the ATEX and IECEx approval option. For an installation requiring hazardous-area certification, selection must include the actual device marking and applicable certificate, not the model name alone.
This page covers the HX configuration specifically. It is intended to help buyers identify the communication version, pneumatic capacity and documentation needed for a quotation. It does not claim that every protection concept listed for the product family applies to every supplied unit.
Technical Specifications
| Parameter | Specification / Selection Note |
|---|---|
| Model | ND9103HX |
| Brand / family | Neles / Valmet ND9000 |
| Input | 4–20 mA with HART communication |
| Power | Loop powered |
| Spool | 03: medium capacity; manufacturer selection guidance: actuator stroke volume 1–3 dm³ |
| Actuator action | Single or double acting with appropriate configuration |
| Valve movement | Rotary or linear with suitable mounting components |
| Enclosure protection | IP66 / NEMA 4X |
| Pneumatic ports | G 1/4 for the ND9100 configuration |
| Cable entry | M20 × 1.5 for the documented X configuration |
| Supply air pressure | 1.4–8 bar; do not exceed the actuator rating |
| Approval option | X: ATEX / IECEx; verify actual marking and applicable certificate |
| Ambient and electrical limits | Depend on protection concept, temperature class, accessories and certificate conditions |
What to Verify for a Hazardous-Area Installation
Start with the classification of the actual mounting location and the protection concept specified by the project. Compare those requirements with the offered unit’s nameplate, certificate and installation instructions. Confirm the temperature class and ambient limits for that arrangement.
The ND9100 standard enclosure should not be described as an Ex d flameproof housing merely because the ordering code contains X. Enclosure construction and approval options must be read together. IP66 / NEMA 4X describes ingress protection; it does not independently establish explosion protection.
Electrical limits depend on the approved installation method. Have the responsible instrumentation personnel check the input circuit and any associated apparatus against the correct documentation. Parameters from a FOUNDATION Fieldbus or PROFIBUS PA version should not be substituted for those of the HART device.
Medium-Capacity Spool and Actuator Matching
The 03 spool is the medium-capacity option in Valmet’s ordering table. Its selection guidance associates it with actuator stroke volumes of 1–3 dm³. Required travel time and the pneumatic arrangement of the complete valve assembly must also be considered.
Record whether the actuator is single acting or double acting, and whether valve motion is rotary or linear. Confirm the bracket, shaft adapter and feedback arrangement for that combination. Mechanical fit is more than a matching bolt pattern.
State whether existing tubing and fittings will be reused. A controller-only delivery may not include the hardware needed to install it on a different actuator. Check the actuator pressure rating as well as the controller supply specification before defining the air supply arrangement.
HART Integration and Commissioning
The H version uses a 4–20 mA control input with HART communication. Check the actual device revision and host support when preparing configuration software or device description files. Communication compatibility should be established before the maintenance window.
The ND9000 family provides local and remote configuration and diagnostic functions. Use those functions with the instructions for the installed revision. Calibration does not correct an unsuitable mounting kit, incorrect actuator settings or an approval mismatch.
Any calibration or movement test must follow the site’s approved isolation and work procedures. Agree who will configure the unit and record the accepted settings before the assembly returns to service. This product description is not a live-process commissioning procedure.
How HX Differs from HN and HXT
The ND9103HN uses the same HART communication designation but has no hazardous-area approvals under its N suffix. It should not be accepted as an equivalent replacement where the installation requires the X approval configuration.
The additional T in ND9103HXT specifies an internal position transmitter. The ND9103HX code listed here does not include that option. If the control system needs a separate analog position feedback circuit, make that requirement explicit in the enquiry.
For alternative communication and approval configurations, consult the ND9103 series overview. Keep the complete offered code on the quotation and purchase order so that differences remain visible.
Ordering Information
Send Wuhan Yuli a readable nameplate photograph, required quantity and destination. Include the actuator model, valve tag and mounting photographs for a replacement project. Attach the project’s approval requirements where applicable.
Ask for the exact offered configuration, actual-unit photographs, available certificate documents and accessory scope. Confirm condition, delivery timing and warranty terms in writing. No live stock quantity, manufacturing date or fixed delivery promise is asserted on this page.
A clean product image is useful for identification but does not establish service history or certification. Use the actual supplied-unit records when approving a purchase. Our replacement checklist can help organize the information required for review.
Frequently Asked Questions
Is ND9103HX a HART controller?
Yes. H identifies the 4–20 mA HART version. Check the device revision when selecting host integration files.
Does X mean the controller can be installed in any hazardous location?
No. Suitability depends on the actual approval marking, certificate, installation method and site classification.
Is a separate analog position transmitter included?
The listed HX code has no T transmitter option. Request the appropriate complete configuration if independent analog feedback is required.
Which mounting parts are supplied?
The written quotation defines the included components. Specify brackets, shaft adapters, fittings and cable entry components before ordering.
Official Documents and Request for Quotation
Technical references: Valmet ND9000 technical datasheet and ND9000 installation and maintenance instructions. Consult the documents applicable to the supplied revision for detailed limits.
Request a Neles ND9103HX quotation with your quantity, destination, target delivery date and approval requirements. Confirm the complete model, condition, documents and delivery scope before placing the order.



